CRC 14610 RUST CONVERTER AEROSOL 1X425G

CRC Rust Converter is a unique fast drying coating formulated for treatment of lightly rusted or correctly prepared metal surfaces. CRC Rust Converter neutralises rust and converts it to a tough black primer in one easy step. It binds to the surface and provides a waterproof barrier by sealing out moisture and other outside elements for effective long-lasting rust protection. No more sandblasting, heavy scraping, or grinding.

1. Apply only when temperatures are between 10 degree C and 32 degree C. 2. Remove dirt, grease, oil and other contaminants. 3. Remove blistered or loose or heavy rust scale with a scraper or mechanical sander. 4. Use of rubber gloves is recommended. 5. Mix or shake well before using. 6. Pour estimated amount needed into a clean container. Material cannot be returned to original container after use. 7. For maximum penetration, work CRC Rust Converter into rusted surfaces with a synthetic bristle brush. For large areas, use a roller or sprayer. 8. Minimum 12 hours cure time before painting. Overcoat with an enamel top coat for best results. If using a water based topcoat use a stain-blocking primer to avoid staining. 9. Clean all painting equipment immediately after use with cold water. 10. Protect CRC Rust Converter from freezing in the container. Store above 5 degree C.

• Ready to Use - No additional mixing or chemical additives required.

• One easy step - Instantly neutralises rust and converts it to an excellent tough black primer.

• Long-lasting - Protects surfaces for years.

• Seals out moisture - Prevents future rusting. Note: Rust Converter may not prevent further rusting when applied to heavy rust scale.

• Can be applied to damp surfaces.

• No residue to wash off - No clean up.

• Compatible with most standard decorative paint systems for metals.

• Flash Point: 20 degree C

• Flammability: Highly Flammable