MILWAUKEE M18FPP11A3503B M18 FUEL 11 PIECE POWER PACK 11A3

The M18 FUEL 13 mm Hammer Drill Driver delivers the capability to drill large holes at high speed into the densest materials. The cordless drill is a compact design and solution, featuring AutoStop Control Mode for Enhanced Safety. The POWERSTATE Brushless motor delivers the most power under load to complete 2-9/16" Self-Feed holes in dense woods for increased productivity. At only 175 mm in length, it provides maximum access and manoeuvrability in tight spaces. The AutoStop Control Mode offers enhanced safety for the operator by preventing over-rotation in a bind-up. The REDLINK PLUS intelligence ensures maximum performance and protection from overloads, heating, and over-discharge whilst the all metal ratcheting chuck provides increased grip strength, durability, and corrosion resistance.

• POWERSTATE Brushless Motor delivers 158 Nm of Max Torquewith 2,100 RPM and 33,000 BPM

• Redesigned trigger mechanism with improved fitment and smoother acceleration provides the ultimate trigger control

• Offers an enhanced safety control mode, AUTOSTOP, preventing over-rotations in bind-up situations

• New M-Clutch design enables the tool to handle a wider range of torque settings with improved drilling and fastening performance

• Voltage: 18V

• Chuck Type: 13mm Metal Chuck

• Speed 1: 0 - 500rpm

• Speed 2: 0 - 2100rpm

• Blows per minute: 0 - 33,000bpm

• Torque: 158Nm

• Length: 175mm

• Weight:1.5kg

The M18 FUEL 1/4" Hex Impact Driver features the POWERSTATE Brushless motor which delivers maximum power for a full range of capabilities to complete the widest variety of applications. Increase productivity on the jobsite with fast driving speed without sacrificing power or control.REDLINK PLUS intelligence delivers Ultimate Trigger Control by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials. Featuring 4-mode drive control provides users with greater control over output speed and power.Self-Tapping Screw Mode is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking, and stripping out screws. The new impact driver also features Tri-LED lighting, illuminating the area of work while eliminating shadows.

• 1 x Bit Holder

• 1 x Belt Clip

• Enhanced motor gives the M18FID3 0 - 4,400 IPM and 226 Nm of Max Torque

• Provides the user the ability to deliver power to more demanding applications back-to-back

• Enhanced motor delivers an improved 3,900 RPM when compared to previous generations

• Provides the user with increased range of speed to complete application fast and with minimal downtime

• Redesigned trigger mechanism with improved fitment and smoother acceleration

• Tri-LED lighting illuminating the area of work while eliminating shadows

• 4-Mode Drive Control provides users with greater control over the output speed and power

• Voltage: 18V

• Chuck Type: 1/4" Hex

• Maximum Torque: 226Nm

• Mode 1: 0 - 1700rpm

• Mode 2: 3000rpm

• Mode 3: 3900rpm

• Mode 4: 3900rpm

• Mode 1: 0 - 1400ipm

• Mode 2: 3600ipm

• Mode 3: 4400ipm

• Mode 4: 4400ipm

• Overall Length: 113.5mm

• Weight: 1.0kg

Designed for the carpenter, remodeler and general contractor, the M18 FUEL 184mm Circular Saw, M18FCS66-0, from Milwaukee generates corded power, cuts faster and gives users up to 750 cuts in 2x4 per charge. The POWERSTATE Brushless Motor provides 5800rpm and higher speeds under load for corded cutting performance. All magnesium guards and shoe delivers extreme durability for jobsite conditions. A built-in rafter hook offers quick and easy storage and an electric brake stops the blade quickly after cuts are complete for maximum productivity.

• 1 x 184mm Blade

• 1 x Rip fence

• 1 x Wrench

• Milwaukee POWERSTATE Brushless Motor provides more power, more run-time and longer life

• Integrated rafter hook for easy storage

• Integrated dust port on guard and included vac adaptor

• Magnesium shoe and guard for maximum durability

• Electric brake to stop blade after trigger is released

• LED Light for increased accuracy and visibility

• Voltage: 18V

• Blade diameter: 184mm

• Arbor size: 15.88mm

• No load speed: 5800rpm

• Max bevel capacity: 50°

• Length: 419mm

• Weight: 4kg

• At 90°: 63.5mm

• At 45°: 47mm

The M18 FUEL 1/2" Mid-Torque Impact Wrench with Friction Ring delivers access in tight spaces, up to 881 Nm of nut-busting torque, and maximum power to weight ratio. This battery-powered impact wrench weighs only 1.58 kg, making it extremely versatile, capable of performing a wide variety of applications. A POWERSTATE Brushless Motor provides the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. The MILWAUKEE 1/2" Mid-Torque Impact Wrench with Friction Ring is only 152 mm in length, providing users access to stubborn fasteners where larger impact wrenches cannot fit without needing to disassemble components to reach bolts. Tri-LEDs that surround the anvil to deliver the user brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers enhanced precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, Auto Shut-Off Mode applies no more than 48 Nm of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Mode, where the tool delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18 REDLITHIUM-ION battery pack (not included) fits all M18 tools, delivering more work per charge and more work over the life of the pack.

• Friction ring ensures quick and easy socket changes POWERSTATE

• Brushless Motor delivers up to 881 Nm of nut-busting torque

• 4-Mode DRIVE CONTROL provides control over output speed and power

• Auto Shut-Off Mode prevents over-tightening and increases productivity by applying no more than 48 Nm of torque

• Bolt Removal mode delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops

• 152 mm in length for maximum access in tight spaces

• Tri-LEDs deliver high definition lighting to increase workspace visibility with fewer shadows

• Works in up to 69kV environments

• REDLINK PLUS Intelligence ensures maximum performance and protects from overloads, heating and over-discharge

• Voltage: 18V

• Anvil Type: 1/2" Square with Friction Ring

• Fastening Torque: 746 Nm

• Nut-Busting Torque: 881 Nm

• DRIVE CONTROL: 4-Mode with Auto Shut-Off Mode & Bolt Removal Mode

• RPM: 0 – 1,250 / 0 – 1,950 / 0 – 2,575 / 0 – 2,575

• IPM: 0 – 900 / 0 – 2,100 / 0 – 3,100 / 0 – 3,100

• Length: 152 mm

• Weight (Tool only): 1.58 kg

The M18 FUEL 125 mm (5") Angle Grinder with Deadman Paddle Switch is the next advancement in power and performance, fast cutting, and a lighter and more compact design when compared to the current model. The POWERSTATE Brushless Motor delivers maximum sustained power and 8,500 RPM to remove material faster and increase productivity. REDLINK PLUS Intelligence ensures unmatched levels of performance, protection, and compatibility. The M18 FUEL 125 mm (5") Angle Grinder with Deadman Paddle Switch includes an electronic clutch for kickback protection, as well as overload protection to maximize motor life. With tool-free accessory and guard adjustments, users will experience fast accessory changes, and less downtime, while remaining fully compatible with the most common accessories in the market. The MILWAUKEE® M18 FUEL 125 mm (5") Angle Grinder with Deadman Paddle Switch takes cordless grinders to the next level.

• 1 x Anti-Vibration Side Handle

• 1 x 125 mm (5") Type 27 Guard

• 1 x Type 1 Clip-On Guard

• 1 x Backing Flange

• 1 x Spanner Wrench

• 2 x Vent Clips

• Next-generation M18CAG125XPD with electronic and ergonomic upgrade

• More compact, lightweight, and balanced design allows for more comfortable and maneuverable use

• POWERSTATE Brushless Motor provides 8,500 RPME-Clutch with kickback protection

• FIXTEC System allows 100% tool-free wheel change

• Paddle switch design provides increased comfort and ease-of-use in various positions

• Wheel Diameter 125 mm (5")

• Switch Type Paddle Switch

• No-Lock No Load: RPM 8,500

• Spindle: M14

• E-Clutch / Kickback Protection: Yes

• Overload Protection: Yes

• Tool-Free Guard Change: Yes

• Tool-Free Accessory Change: Yes

• Anti-Vibration Handle: Yes

The M18 FUEL 26 mm SDS Plus Rotary Hammer delivers fast drilling, hard-hitting performance and maximum control for productivity on the job site. Designed to achieve top performance with only moderate pressure, the rotary hammer is compatible with all M18 REDLITHIUM-ION bateries, and is optimized for use with M18 REDLITHIUM-ION HIGH OUTPUT 6.0Ah batteries (sold separately). The POWERSTATE Brushless Motor delivers users 2.7 J of impact energy, 1,330 RPM, and 4,800 BPM, providing speed and power in the most demanding applications. REDLINK PLUS Intelligence tool technology ensures maximum rotary drill performance and protects the tool from overload, overheating, and over-discharge. The MILWAUKEE M18 FUEL 26 mm SDS Plus Rotary Hammer includes AUTOSTOP Kickback Control for maximum control and enhanced safety, with the tool sensing a bind-up situation when users are drilling in rebar or hard aggregate and stopping over-rotation, without the need for the user to release the trigger, indicated by the AUTOSTOP Indicator LED. The Anti-Vibration System (AVS) minimizes vibration for maximum comfort when in use for extended periods.

• 1 x Side Handle with Depth Gauge

• 3 mode (Rotary Hammer, Hammer Only, and Rotary Only)POWERSTATE Brushless Motor delivers fast drilling

• 2.7 J impact energy for hard-hitting performance Anti-Vibration System (AVS) for maximum user comfort

• AUTOSTOP Kickback Control senses bind-up and prevents over-rotation

• REDLINK PLUS Intelligence integrates full-circle communication between tool, battery, and charger to protect from overloads, over-heating, and over-discharge

• Integrated LED light for illuminating dark workspaces

• Compatible with M18 FUEL HAMMERVAC 26 mm Dedicated Dust Extractor (M18FDEX)

• Adjustable depth gauge rod for accurate hole depth

• Power: 18V

• Max Capacity: 26 mm

• Impact Energy: 2.7

• JRPM: 1,330BPM 4,800BPM

• Kickback Prevention: Yes

• Anti-Vibration: Yes

• Length: 296 mm

• Weight (Tool only): 3.1 kg

The Milwaukee 18V Fuel D-Handle Jigsaw, M18FJS-0, can cut up to 32m in a 19mm laminated particle board and maximum power to takle the hardest materials. The fast blade speed allows for clean and controlled cuts, and faster cutting for greater productivity on the jobsite.

• POWERSTATE Brushless Motor increases the SPM and the power to cut hard materials, including hardwoods and metals

• REDLINK PLUS Intelligence is the most advanced system of cordless power tool electronics; provides optimized performance and overload protection using total system communication between tool, battery and charger

• Variable speed ranges between 0 and 3500 strokes per minute, providing precise control for clean cuts with less chipping

• 4-position orbital cutting provides versatility for application-specific cutting

• Toolless shoe bevel with positive stops allows for quick and accurate shoe adjustment with detents at 0°, 15°, 30° and 45°

• On/Off cut line blower keeps the cut line clear of debris and allows user to turn off blower when using dust extraction

• LED light illuminates the cut line

• Accepts T-Shank jig saw blades

• Voltage: 18V

• Stroke length: 25mm

• Strokes per minute: 0 - 3500spm

• Bevel: 0°, 15°, 30° and 45°

• Blower type: On/Off

• Orbital cutting: 4 Positions

• Blade type: T-Shank

• Length: 226mm

• Weight: 2.2kg

The M18 FUEL SAWZALL Reciprocating Saw is the next generation of legendary performance and durability, designed for the toughest applications on the job site. The M18 FUEL SAWZALL delivers fast cuts, as it leverages a POWERSTATE Brushless Motor to provide users with 3,000 SPM and 32 mm (1-1/4") stroke length for fast material removal. REDLINK PLUS Intelligence ensures maximum performance under stress, as well as protection from overloading, overheating, and over-discharging. The M18 REDLITHIUM-ION 5.0Ah Battery Pack (not included) delivers users runtime and provides more work per charge and more work over the life of the battery pack. The M18 FUEL SAWZALL Reciprocating Saw is designed to perform in demanding applications and is Milwaukee's most durable cordless reciprocating saw yet. A tool-free, wear-resistant blade change reduces downtime on the job, and an anti-corrosion blade clamp and metal reinforced battery rails provide long component life, standing up to tough job site conditions. The M18 FUEL SAWZALL Reciprocating Saw weighs less than the previous generation and features an adjustable shoe, integrated LED light and a hanging hook for convenient storage on the job.

• 1 x 200mm 8/12 TPI SAWZALL Reciprocating Saw Blade

• POWERSTATE Brushless Motor provides fast cutting speed and power through tough applications

• Anti-corrosion blade clamp delivers durability with less downtime due to corrosion

• Metal reinforced battery connection provides improved durability and battery retention over life of the tool

• Built-in LED light illuminates the work surface while cutting

• Lever action QUIK-LOK blade clamp provides fast, easy blade changes

• REDLINK PLUS Intelligence provides optimised performance and overload protection

• Adjustable shoe Hang hook

• Voltage 18VSPM0: 3,000

• Stroke Length: 32 mm (1-1/4")

• Keyless Adjustable Shoe: Yes

• Keyless Blade Clamp: Yes

• Blade: Clamp

• QUIK-LOK: Universal Hang Hook: Yes

• LED Light: Yes

• Length: 434 mm

• Weight(Tool Only): 3.1 kg

The Milwaukee M18 LED Work Light, M18TLED-0, lasts 600 times longer than conventional incandescent bulbs. Its 90° rotating head allows you to easily direct the light beam at the desired work area, while its integrated hook enables hands-free use.With a sealed aluminum head to provide impact and weather resistance, the cordless work light comes with a limited lifetime LED warranty.

• Sealed aluminum head is designed for impact and weather resistant durability

• 90° Rotating head provides flexible, focused illumination

• Integrated hook leaves both hands free for work anywhere on the jobsite

• Compact design for versitile use

• Voltage: 18V

• Length: 216mm

• Weight: 0.32kg

The MILWAUKEE M18 FUEL Multi-Tool generates fast cuts, the power for demolition, and low full tool vibration. The POWERSTATE Brushless Motor delivers 10,000 to 20,000 OPM, with an aggressive 4.2° oscillation angle to deliver fast cuts. The Multi-Tool also gives users the power to complete many demanding applications with ease, such as large cuts through hardwoods and nail embedded wood, removing grout, or tackling other jobs. Vibration dampening technology delivers low full tool vibration, letting the user make cuts more comfortably, and with less fatigue. REDLINK PLUS Intelligence ensures optimal levels of performance, protection, and compatibility between the tool and batery. To allow users to adjust speed to suit the application, the M18 FUEL Multi-Tool features a 10-setting Variable Speed Dial, with an additional Auto-Load feature. Auto-Load sees the tool start slowly when making precise cuts, before automatically ramping up to the highest speed once under load. Tool-free blade change makes accessory changes quick and means no misplaced tools and less down time on the jobsite. An integrated 180° LED light provides users maximum visibility in low-light situations.

• POWERSTATE Brushless Motor, combined with 10,000 to 20,000 OPM delivers fast cut speed

• REDLINK PLUS Intelligence enables communication between tool and bateries, allowing for optimal levels of performance, protection, and compatibility

• Auto-Load feature allows user to start precise cuts slowly, and automatically ramp up to the highest speed under load

• Variable Speed Dial with 10 settings for adjusting speed to application

• Vibration dampening technology for low full tool vibration

• 4.2° oscillation angle

• 180° span LED for visibility in low-light situations

• Tool-free blade change for fast accessory changes

• Voltage: 18V

• Oscillations per minute: 10,000 - 20,000opm

• Oscillation Angle: 4.2°

• Speed Settings: 10

• Length: 310mm

• Weight: 1.2kg

The Milwaukee M18 7.5L Wet & Dry Vacuum Cleaner, M18WDV-0, offers powerful suction for wet and dry applications. The M18WDV-0 offers long continuous run time and high air power and suction to provide quick and easy removal of dust, debris and water. A HEPA filter delivers excellent fine dust collection for dry applications. The stackable toolbox design, on-board hose and accessory storage offer excellent portability and convenience, a built-in blower port allows the vacuum to double as a blower, and the 31.8mm inlet allows standard vacuum attachments to be fastened. It includes vacuum, filter, hose, a crevice tool, hose clip adapter and a wide nozzle.

• 1 x 1.8m Hose

• 1 x Crevice Tool

• 1 x Utility Nozzle

• 1 x Hose Clip Adapter

• 1 x HEPA Filter

• Powerful suction for wet and dry applications

• Quick and easy clean-up for wood/metal shavings, drywall dust and other large area jobsite debris

• Organised and enclosed on-board storage

• Stackable tool box design

• Voltage: 18V

• Max Air Flow: 1,274 L/min (45 CFM)

• Sealed Suction in Water: 813mm (32”) H²O Lift

• Inlet Diameter:31.8 mm (1-1/4”)

• Dimensions (L x W x H): 316mm x 238mm x 445mm

• Weight: 4.7kg

The M18 5.0Ah REDLITHIUM-ION BATTERY features superior pack construction, electronics, and performance to deliver more work per charge and more workover the life of the pack than any battery on the market. M18 5.0Ah REDLITHIUM-ION BATTERY features an advanced design, protecting the pack against harsh jobsite environments. This protection routes water away from the electronics and out of the battery pack, extends run-time and life by minimizing heat, and prevents pack failures from vibration or drops.

This unique to Milwaukee design also allows the battery to operate in extreme cold weather conditions (below -180C). Managed by Milwaukee’s exclusive REDLINK Intelligence, the battery features overload protection to prevent you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage.

• Powersmore than 100 Milwaukee M18 cordless power tools

• REDLINK intelligence provides optimised performance and over load protection

• Best in class construction - offers long lasting performance anddurability

• Fuel gauge on board displays remaining run time for less down time on the job

• All weather performance, delivers fade free power in extreme jobsite conditions

• Voltage: 18V

• Capacity: 5.0Ah

• Weight: 0.72kg

• M12-18FC: 60 mins

• M12-18C:105 mins

Once again, Milwaukee is on the ball for providing the fastest charging solutions for tradies. With the ever-growing demand to charge batteries in both voltages, the new and improved multi voltage charger, M12-18FC, can sequencial charge a 12V or 18V battery up to 40% faster, increasing your productivity on the worksite.

• Charges all Milwaukee batteries up to 40% faster

• Charges all M12 and M18 batteries

• Sequencial charging

• REDLINK intelligence communicates directly with the battery

• REDLINK monitors cell voltageand temperature

• REDLINK charges to optimise the performance, protect and extend the life of the battery

• Voltage: 12V & 18V

• Battery type: Li-ion

• Weight: 0.77kg

• 2.0Ah: 26 minutes

• 4.0Ah: 47 minutes

• 5.0Ah: 59 minutes

• 6.0Ah: 75 minutes