MILWAUKEE M18FPP10C3603B M18 FUEL 10PCE POWER PACK

The M18 FUEL 13 mm Hammer Drill Driver delivers the capability to drill large holes at high speed into the densest materials. The cordless drill is a compact design and solution, featuring AutoStop Control Mode for Enhanced Safety. The POWERSTATE Brushless motor delivers the most power under load to complete 2-9/16" Self-Feed holes in dense woods for increased productivity. At only 175 mm in length, it provides maximum access and manoeuvrability in tight spaces. The AutoStop Control Mode offers enhanced safety for the operator by preventing over-rotation in a bind-up. The REDLINK PLUS intelligence ensures maximum performance and protection from overloads, heating, and over-discharge whilst the all metal ratcheting chuck provides increased grip strength, durability, and corrosion resistance.

• POWERSTATE Brushless Motor delivers 158 Nm of Max Torque with 2,100 RPM and 33,000 BPM

• Redesigned trigger mechanism with improved fitment and smoother acceleration provides the ultimate trigger control

• Offers an enhanced safety control mode, AUTOSTOP, preventing over-rotations in bind-up situations

• New M-Clutch design enables the tool to handle a wider range of torque settings with improved drilling and fastening performance

• Voltage: 18V

• Chuck Type: 13mm Metal Chuck

• Speed 1: 0 - 500rpm

• Speed 2: 0 - 2100rpm

• Blows per minute: 0 - 33,000bpm

• Torque: 158Nm

• Length: 175mm

• Weight: 1.5kg

The M18 FUEL 1/4" Hex Impact Driver features the POWERSTATE Brushless motor which delivers maximum power for a full range of capabilities to complete the widest variety of applications. Increase productivity on the jobsite with fast driving speed without sacrificing power or control.

REDLINK PLUS intelligence delivers Ultimate Trigger Control by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials. Featuring 4-mode drive control provides users with greater control over output speed and power.

Self-Tapping Screw Mode is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking, and stripping out screws. The new impact driver also features Tri-LED lighting, illuminating the area of work while eliminating shadows.

• 1 x Bit Holder

• 1 x Belt Clip

• Enhanced motor gives the M18FID3 0 - 4,400 IPM and 226 Nm of Max Torque

• Provides the user the ability to deliver power to more demanding applications back-to-back

• Enhanced motor delivers an improved 3,900 RPM when compared to previous generations

• Provides the user with increased range of speed to complete application fast and with minimal downtime

• Redesigned trigger mechanism with improved fitment and smoother acceleration

• Tri-LED lighting illuminating the area of work while eliminating shadows

• 4-Mode Drive Control provides users with greater control over the output speed and power

• Voltage: 18V

• Chuck Type: 1/4" Hex

• Maximum Torque: 226Nm

• Mode 1: 0 - 1700rpm

• Mode 2: 3000rpm

• Mode 3: 3900rpm

• Mode 4: 3900rpm

• Mode 1: 0 - 1400ipm

• Mode 2: 3600ipm

• Mode 3: 4400ipm

• Mode 4: 4400ipm

• Overall Length: 113.5mm

• Weight: 1.0kg

The M18 FUEL 1/2" Compact Impact Wrench with Friction Ring delivers maximum access in tight spaces, up to 339 Nm of nut-busting torque, and maximum workspace visibility. This battery-powered impact wrench measures only 124.5 mm in length, with a POWERSTATE Brushless Motor to provide the power to remove stubborn fasteners, even in confined spaces. The MILWAUKEE 1/2" Compact Impact Wrench with Friction Ring has tri-LEDs that surround the anvil to deliver the user brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers enhanced precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, Auto Shut-Off Mode applies no more than 27 Nm of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Mode, where the tool delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18 REDLITHIUM-ION battery pack (not included) fits all M18 tools, delivering more work per charge and more work over the life of the pack.

• Friction ring ensures quick and easy socket changes POWERSTATE Brushless Motor delivers up to 339 Nm of nut-busting torque

• 4-Mode DRIVE CONTROL provides control over output speed and power

• Auto Shut-Off Mode prevents over-tightening and increases productivity by applying no more than 27 Nm of torque

• Bolt Removal mode delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops

• 124.5 mm in length for maximum access in tight spaces

• Tri-LEDs deliver high definition lighting to increase workspace visibility with fewer shadows

• Works in up to 69kV environments

• REDLINK PLUS Intelligence ensures maximum performance and protects from overloads, heating and over-discharge

• Voltage: 18V

• Anvil Type: 1/2" Square with Friction Ring

• Fastening Torque: 339 Nm

• Nut-Busting Torque: 339 Nm

• DRIVE CONTROL: 4-Mode with Auto Shut-Off Mode & Bolt Removal Mode

• RPM: 0 – 900 / 0 – 1,650 / 0 – 2,400 / 0 – 2,400

• IPM: 0 – 1000 / 0 – 2,400 / 0 – 3,500 / 0 – 3,500

• Length: 125.4 mm

• Weight (Tool only): 1.1 kg

The M18 FUEL 125 mm (5") Angle Grinder with Deadman Paddle Switch is the next advancement in power and performance, fast cutting, and a lighter and more compact design when compared to the current model. The POWERSTATE Brushless Motor delivers maximum sustained power and 8,500 RPM to remove material faster and increase productivity. REDLINK PLUS Intelligence ensures unmatched levels of performance, protection, and compatibility. The M18 FUEL 125 mm (5") Angle Grinder with Deadman Paddle Switch includes an electronic clutch for kickback protection, as well as overload protection to maximize motor life. With tool-free accessory and guard adjustments, users will experience fast accessory changes, and less downtime, while remaining fully compatible with the most common accessories in the market. The MILWAUKEE® M18 FUEL 125 mm (5") Angle Grinder with Deadman Paddle Switch takes cordless grinders to the next level.

• 1 x Anti-Vibration Side Handle

• 1 x 125 mm (5") Type 27 Guard

• 1 x Type 1 Clip-On Guard

• 1 x Backing Flange

• 1 x Spanner Wrench

• 2 x Vent Clips

• Next-generation M18CAG125XPD with electronic and ergonomic upgrade

• More compact, lightweight, and balanced design allows for more comfortable and maneuverable use

• POWERSTATE Brushless Motor provides 8,500 RPME-Clutch with kickback protection

• FIXTEC System allows 100% tool-free wheel change

• Paddle switch design provides increased comfort and ease-of-use in various positions

• Wheel Diameter 125 mm (5")

• Switch Type: Paddle Switch

• No-Lock No Load: RPM 8,500

• Spindle: M14

• E-Clutch / Kickback Protection: Yes

• Overload Protection: Yes

• Tool-Free Guard Change: Yes

• Tool-Free Accessory Change: Yes

• Anti-Vibration Handle: Yes

The M18 FUEL 165mm Circular Saw is the fastest saw in its class, offering up to 30% faster cutting, 2X more runtime and 3X longer tool life than competitive saws. The POWERSTATE Brushless Motor outpowers all other 18V cordless circular saws and allows you to perform jobs that previously required a corded tool.

The 18V lithium-ion circular saw's guards and shoe are built of cast magnesium to provide a durable, lightweight base. The saw also features an integrated LED light and a rafter hook for convenient storage on the job.

• A cordless circular saw that has ripping capabilities of a corded saw

• Milwaukee patented POWERSTATE brushless motor provides superior cutting power

• REDLINK PLUS electronics gives total system communication between tool, battery and charger

• Cast magnesium shoe and upper and lower guard provides a lightweight and durable base

• Cut Line dust blower for increased visibility during cutting application

• RAFTER HOOK for easy storage on the job

• Intergrated LED light for user visibility

• Voltage: 18V

• Speed: 0 - 5000rpm

• Blade size: 165mm

• Bore: 15.88mm

• Blade guard: Magnesium

• Depth of cut: 55mm

• Length: 343mm

• Weight: 3.1kg

The Milwaukee M18 FUEL HACKZALL is the fastest cutting and most powerful one-handed reciprocating saw. Utilising a POWERSTATE Brushless Motor and a best in class 22mm stroke length, the M18 FUEL HACKZALL cuts up faster. The compact, one-handed design provides superior control and the ability to make cuts in tight spaces. The dual gear counter balance mechanism provides lower vibration than traditional reciprocating saws, resulting in faster cut-starts in metal and reduced user fatigue. A rubber seal and weep holes provide superior protection against water and debris.

• Compact and Lightweight design allows for easier cutting in tight spaces or overhead applications

• One-handed design provides superior control and versatility over standard reciprocating saws

• 22mm stroke length removes more material with each stroke resulting in faster cuts

• Pivoting shoe provides constant contact with the work-piece resulting in smoother cuts with less bucking and vibration

• Lower vibration for smooth cut starts & one-handed control

• Voltage: 18V

• Stroke Length: 22mm

• No load speed: 0 - 3000spm

• Shoe: Pivoting Shoe

• Length: 355mm

• Weight: 1.85kg

The MILWAUKEE M18 FUEL Multi-Tool generates fast cuts, the power for demolition, and low full tool vibration. The POWERSTATE Brushless Motor delivers 10,000 to 20,000 OPM, with an aggressive 4.2° oscillation angle to deliver fast cuts. The Multi-Tool also gives users the power to complete many demanding applications with ease, such as large cuts through hardwoods and nail embedded wood, removing grout, or tackling other jobs. Vibration dampening technology delivers low full tool vibration, letting the user make cuts more comfortably, and with less fatigue. REDLINK PLUS Intelligence ensures optimal levels of performance, protection, and compatibility between the tool and batery. To allow users to adjust speed to suit the application, the M18 FUEL Multi-Tool features a 10-setting Variable Speed Dial, with an additional Auto-Load feature. Auto-Load sees the tool start slowly when making precise cuts, before automatically ramping up to the highest speed once under load. Tool-free blade change makes accessory changes quick and means no misplaced tools and less down time on the jobsite. An integrated 180° LED light provides users maximum visibility in low-light situations.

• POWERSTATE Brushless Motor, combined with 10,000 to 20,000 OPM delivers fast cut speed

• REDLINK PLUS Intelligence enables communication between tool and bateries, allowing for optimal levels of performance, protection, and compatibility

• Auto-Load feature allows user to start precise cuts slowly, and automatically ramp up to the highest speed under load

• Variable Speed Dial with 10 settings for adjusting speed to application

• Vibration dampening technology for low full tool vibration

• 4.2° oscillation angle

• 180° span LED for visibility in low-light situations

• Tool-free blade change for fast accessory changes

• Voltage: 18V

• Oscillations per minute: 10,000 - 20,000opm

• Oscillation Angle: 4.2°

• Speed Settings: 10

• Length: 310mm

• Weight: 1.2kg

• 3 speed Electronic Switch for versatile clearing power

• Extension Nozzle clears dust and debris easily. Soft plastic resists crushing or cracking

• Universal inflator/deflator for easy setup or take down of most inflatable products

• Lock on switch reduces user fatigue

• Shock absorbing polymer

• Reinforced handle resists drops

• Voltage: 18V DC

• Motor Type: 4-Pole Frameless Motor

• Air Volume: 0 - 100cfm

• Fan speed: 0 - 18,700rpm

• Speed: 3 speed Electronic Switch

• Weight: 1.2kg

The most versatile flood light for any task - the Milwaukee M18 Pivoting Area Light, M18PAL-0, is designed to work in any workspace, jobsite, and on any surface. It has two powerful magnets allowing users to mount this light to almost any metal surface. It also has a 51mm spring loaded clamp giving the user the ability to fix this light to piping, dimensional lumber, jobsite equipment, and cabinetry & doors. These hanging features are paired with a folding rotating light head design allowing our users to direct the light to their workspace to increase productivity. The M18 Pivoting Area Light puts out 1500 lumens of high quality light and runs up to 20 hours giving users a powerful flood spread and all day runtime. It is impact resistant up to 2.7m allowing it to take a drop and keeping working.

• Rotating folding light head design

• Integrated magnets for metal studs, I-Beams and job boxes

• Spring loaded clamp for wood studs, scissor lifts, ladders and job carts

• Up to 20 hours run time

• Survives 2.7m drops

• IP Rating - IP54 - Dust and water resistant

• Voltage: 18V

• High: 1500 lumens

• Medium: 600 lumens

• Low: 300 lumens

• IP Rating: IP54

• Length: 165.1mm

• Weight: 1.4kg

The Milwaukee M18 7.5L Wet & Dry Vacuum Cleaner, M18WDV-0, offers powerful suction for wet and dry applications. The M18WDV-0 offers long continuous run time and high air power and suction to provide quick and easy removal of dust, debris and water. A HEPA filter delivers excellent fine dust collection for dry applications. The stackable toolbox design, on-board hose and accessory storage offer excellent portability and convenience, a built-in blower port allows the vacuum to double as a blower, and the 31.8mm inlet allows standard vacuum attachments to be fastened. It includes vacuum, filter, hose, a crevice tool, hose clip adapter and a wide nozzle.

• 1 x 1.8m Hose

• 1 x Crevice Tool

• 1 x Utility Nozzle

• 1 x Hose Clip Adapter

• 1 x HEPA Filter

• Powerful suction for wet and dry applications

• Quick and easy clean-up for wood/metal shavings, drywall dust and other large area jobsite debris

• Organised and enclosed on-board storage

• Stackable tool box design

• Voltage: 18V

• Max Air Flow: 1,274 L/min (45 CFM)

• Sealed Suction in Water: 813mm (32") H²O Lift

• Inlet Diameter: 31.8 mm (1-1/4")

• Dimensions (L x W x H): 316mm x 238mm x 445mm

• Weight: 4.7kg

The Milwaukee M18 REDLITHIUM™ 6.0Ah Battery, M18B6, delivers up to 3X more run-time, 20% more power and 2X more life than standard 18V Li-ion batteries. It features superior pack construction, electronics, and performance to deliver more work per charge and more work over the life of the pack than any battery on the market.

The M18B6 features an advanced design, protecting the pack against harsh jobsite environments - this protection routes water away from the electronics and out of the battery pack, extends run-time and life by minimizing heat, and prevents pack failures from vibration or drops. This unique to Milwaukee design also allows the battery to operate in extreme cold weather conditions (below 18°C).

Managed by Milwaukee’s exclusive REDLINK™ Intelligence, the battery features overload protection to prevent you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage. It also provides full system compatibility with 100+ M18™ cordless solutions. Upgrade to the M18 REDLITHIUM™ 6.0Ah Battery, M18B6, to instantly increase the run-time and durability of your M18™ cordless tools.

• REDLINK™ Intelligence: Provides optimized performance and overload protection using total system communication between tool, battery and charger

• Best-in-Class Construction: Offers long-lasting performance and durability

• Fuel gauge onboard: Displays remaining runtime for less downtime on the job

• All-Weather Performance: Delivers fade free power in extreme jobsite conditions

• Versatility: Powers more than 100 Milwaukee® M18™ cordless power tools

• Voltage: 18V

• Amp hour: 6.0Ah

• Dimensions (L x W x H): 92mm x 92mm x 140mm

• Weight: 0.86kg

Once again, Milwaukee is on the ball for providing the fastest charging solutions for tradies. With the ever-growing demand to charge batteries in both voltages, the new and improved multi voltage charger, M12-18FC, can sequencial charge a 12V or 18V battery up to 40% faster, increasing your productivity on the worksite.

• Charges all Milwaukee batteries up to 40% faster

• Charges all M12 and M18 batteries

• Sequencial charging

• REDLINK intelligence communicates directly with the battery

• REDLINK monitors cell voltage and temperature

• REDLINK charges to optimise the performance, protect and extend the life of the battery

• Voltage: 12V & 18V

• Battery type: Li-ion

• 2.0Ah: 26 minutes

• 4.0Ah: 47 minutes

• 5.0Ah: 59 minutes

• 6.0Ah: 75 minutes

• 9.0Ah: 90 minutes

• Weight: 0.77kg